Allwinner H2+搭載のOrange Pi Zeroが、2016/11/02の発注からわずか８日で到着。
箱はOrange Pi One/Lite共通箱を流用している模様（・・・とはいっても、うちでOrange Pi Oneを買った時はこの箱じゃなかったんですけどね）
早速開梱！
まぁ、いつもの梱包物、といった感じです。
改めて見てみると・・・ヒートシンク、どうつけよう？と悩みます。
もうちょっとつけやすいレイアウト考えてくれないかなぁ・・・
そして、「H2+」というチップ上のロゴ。
Allwinner H2とH2+にどのような違いがあるのか・・・これは非常に謎なところです。
で・・・Orange Pi Zeroはシリアルコンソールのみなのですが・・・うっかりしてUSBシリアルを用意するのを忘れていました。
とりあえず、microSDにOSを書き込んで起動テストしてみるか・・・と思ったら、うっかり間違えてAndroidイメージをダウンロードしていました。
Orange Pi Zero用のLinux系イメージを公式からダウンロードしようかと思ったのですが、どれも遅いBaiduのリンクのみ。
Google Driveのアイコンはあってもリンクは無いのです。
Debian ServerについてはGoogle Driveでリンクが設定されているものの飛ぶ先はOrange Pi 2/Orange Pi mini 2向けのイメージという始末。
Baiduからダウンロードをしてみているものの、残り3時間～7時間を行ったり来たりという非常に速度が安定しない感じです。
armbianのOrange Pi Zero向けページに、「check daily beta / preview images」というリンクがあり、そこから開発中のOrange Pi Zero向けイメージがダウンロードして起動試験
2016/11/14追記:正式版がリリースされました。 「Jessie server(Debian)」もしくは「Xenial server(Ubuntu)」をダウンロードします。
なお、rootパスワードは「Getting Started」にあるよう1234です。
正常にOSが書き込まれており、起動が開始したのであれば下記の赤枠部分にあるLEDの上側が緑に点灯します。
状況によっては緑点滅だったり、下側の赤LEDも点滅したりします
緑LEDも赤LEDも付かず、RJ45コネクタのLEDのみがついているようであれば、microSDからOSが読み込めていません。
DHCPサーバで該当する時間にIPが払い出されているものを確認して、TeraTermからsshログインを実行
正常にログイン完了です。
有線LANは特に問題無し
2016/11/14追記
無線LANも正式版では普通に対応しました。
後述の無線LANのfirmwareを置く作業とかが不要になりました。
無線LANは初物のAllwinner XR819を使っています。
cnx-softwareに記事が出ています
「Allwinner H2 Linux & Android SDK, and Allwinner XR819 WiFi Driver Released」
root@orangepizero:~# lsmod
Module Size Used by
dhd 666855 1
pcf8591 3363 0
bmp085 3487 0
root@orangepizero:~#
root@orangepizero:~# echo blacklist dhd > /etc/modprobe.d/dhd.conf
root@orangepizero:~# reboot
再起動後
root@orangepizero:~# lsmod
Module Size Used by
bmp085 3487 0
pcf8591 3363 0
root@orangepizero:~#
root@orangepizero:~# modprobe xradio_wlan
modprobe: ERROR: could not insert 'xradio_wlan': Operation not permitted
root@orangepizero:~# dmesg
＜略＞
[ 337.756884] mmc1: new high speed SDIO card at address 0001
[ 337.757361] [SBUS] XRadio Device:sdio clk=50000000
[ 337.763911] [XRADIO] XRADIO_HW_REV 1.0 detected.
[ 337.769390] [XRADIO_ERR] filp_open failed(-2)
[ 337.774473] [XRADIO_ERR] xr_request_file:xr_fileopen failed!
[ 337.780967] [XRADIO_ERR] xradio_parse_sdd: can't load sdd file /system/etc/firmware/sdd_xr819.bin.
[ 337.860139] [XRADIO_ERR] filp_open failed(-2)
[ 337.865110] [XRADIO_ERR] xr_request_file:xr_fileopen failed!
[ 337.871583] [XRADIO_ERR] xradio_bootloader: can't load bootloader file /system/etc/firmware/boot_xr819.bin.
[ 337.882721] [XRADIO_ERR] xradio_load_firmware: can't download bootloader.
[ 337.890490] [XRADIO_ERR] xradio_load_firmware failed(-1).
[ 337.897099] xradio wlan power off
[ 337.901158] gpio wl_reg_on set val 0, act val 0
[ 337.951205] [XRADIO] Remove SDIO card 1
[ 337.951451] mmc1: card 0001 removed
[ 337.951708] [mmc]: sdc1 power_supply is null
root@orangepizero:~#
XR819のドライバである「xradio_wlan」が読み込めない。
理由は /system/etc/firmware/ ディレクトリにfriwmareファイルが無いから、というのだけど、どこから入手するのか書かれていない・・・
H2-V1.2.tar.gz の中から持ってこい、ってことなんだろうか？
とりあえず無線LANについては放置です。
2016/11/11追記
やはりH2-V1.2.tar.gzの中にfirmwareファイルがあった。
./android/hardware/broadcom/wlan/bcmdhd/firmware/xr819/boot_xr819.bin
./android/hardware/broadcom/wlan/bcmdhd/firmware/xr819/fw_xr819.bin
./android/hardware/broadcom/wlan/bcmdhd/firmware/xr819/sdd_xr819.bin
./lichee/buildroot/target/dragonboard/src/testcases/wifitester/xr819/boot_xr819.bin
./lichee/buildroot/target/dragonboard/src/testcases/wifitester/xr819/fw_xr819.bin
./lichee/buildroot/target/dragonboard/src/testcases/wifitester/xr819/sdd_xr819.bin
どちらも同じなようなので好きな方のファイルをOrange Pi Zero上の「/system/etc/firmware」ディレクトリにコピーすればokでした。
root@orangepizero:/# mkdir -p /system/etc/firmware/
＜firmwareファイルを配置＞
root@orangepizero:/# ls -l /system/etc/firmware/
total 132
-rwxr-xr-x 1 root root 2308 Nov 11 14:11 boot_xr819.bin
-rwxr-xr-x 1 root root 126416 Nov 11 14:11 fw_xr819.bin
-rwxr-xr-x 1 root root 744 Nov 11 14:11 sdd_xr819.bin
root@orangepizero:/#
ドライバの読み込み
root@orangepizero:/# modprobe xradio_wlan
root@orangepizero:/# lsmod
Module Size Used by
xradio_wlan 210610 0
mac80211 358445 1 xradio_wlan
pcf8591 3363 0
bmp085 3487 0
root@orangepizero:/# dmesg
＜中略＞
[ 6679.777461] [SBUS] XRadio Device:sdio clk=50000000
[ 6679.788126] [XRADIO] XRADIO_HW_REV 1.0 detected.
[ 6679.894661] [XRADIO] Bootloader complete
[ 6679.983907] [XRADIO] Firmware completed.
[ 6679.994377] [WSM] Firmware Label:XR_C01.08.0043 Jun 6 2016 20:41:04
[ 6680.005641] [XRADIO] Firmware Startup Done.
[ 6680.015551] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 6680.220459] [STA] !!!xradio_vif_setup: id=0, type=2, p2p=0
[ 6680.272331] ADDRCONF(NETDEV_UP): wlan0: link is not ready
root@orangepizero:/#
root@orangepizero:/# iwconfig
lo no wireless extensions.
tunl0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
eth0 no wireless extensions.
root@orangepizero:/#
root@orangepizero:/# nmcli dev wifi list
* SSID MODE CHAN RATE SIGNAL BARS SECURITY
00xxxxxxxxx4 Infra 4 54 Mbit/s 80 ???_ WPA1 WPA2
RT200NE-xxxxxx Infra 7 54 Mbit/s 60 ???_ WEP
RT200NE-xxxxxx-1 Infra 7 54 Mbit/s 60 ???_ WPA1
xxxxxparty_ap-2.4G Infra 6 54 Mbit/s 39 ??__ WPA1 WPA2
URoad-xxxxxx Infra 6 54 Mbit/s 35 ??__ WPA1 WPA2
root@orangepizero:/#
root@orangepizero:/# iwconfig
lo no wireless extensions.
tunl0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
eth0 no wireless extensions.
root@orangepizero:/# nmcli dev wifi connect 00xxxxxxxxx4 password ＜パスワード＞
Device 'wlan0' successfully activated with '7d39892d-ea9d-442d-bc9b-1dfxxxx4d9da'.
root@orangepizero:/# iwconfig
lo no wireless extensions.
tunl0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"00xxxxxxxxx4"
Mode:Managed Frequency:2.427 GHz Access Point: 74:03:BD:xx:xx:1C
Bit Rate=65 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=51/70 Signal level=-59 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth0 no wireless extensions.
root@orangepizero:/#
下記にいろいろな出力サンプル置いときます
root@orangepizero:~# uname -a
Linux orangepizero 3.4.113-sun8i #309 SMP PREEMPT Wed Nov 9 22:05:23 CET 2016 armv7l armv7l armv7l GNU/Linux
root@orangepizero:~# cat /proc/cpuinfo
Processor : ARMv7 Processor rev 5 (v7l)
processor : 0
BogoMIPS : 2400.00
processor : 1
BogoMIPS : 2400.00
processor : 2
BogoMIPS : 2400.00
processor : 3
BogoMIPS : 2400.00
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 5
Hardware : sun8i
Revision : 0000
Serial : 34355042074e54000080
root@orangepizero:~# cat /proc/meminfo
MemTotal: 247068 kB
MemFree: 151436 kB
Buffers: 624 kB
Cached: 49408 kB
SwapCached: 0 kB
Active: 39996 kB
Inactive: 27388 kB
Active(anon): 2152 kB
Inactive(anon): 16220 kB
Active(file): 37844 kB
Inactive(file): 11168 kB
Unevictable: 0 kB
Mlocked: 0 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 247068 kB
LowFree: 151436 kB
SwapTotal: 131068 kB
SwapFree: 131068 kB
Dirty: 28 kB
Writeback: 0 kB
AnonPages: 17352 kB
Mapped: 8320 kB
Shmem: 1020 kB
Slab: 13968 kB
SReclaimable: 5588 kB
SUnreclaim: 8380 kB
KernelStack: 816 kB
PageTables: 988 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 254600 kB
Committed_AS: 142908 kB
VmallocTotal: 761856 kB
VmallocUsed: 16716 kB
VmallocChunk: 515988 kB
root@orangepizero:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 39M 0 39M 0% /dev
tmpfs 25M 1012K 24M 5% /run
/dev/mmcblk0p1 15G 1.2G 13G 8% /
tmpfs 121M 0 121M 0% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 121M 0 121M 0% /sys/fs/cgroup
tmpfs 121M 0 121M 0% /tmp
tmpfs 25M 0 25M 0% /run/user/0
root@orangepizero:~# lsmod
Module Size Used by
dhd 666855 1
pcf8591 3363 0
bmp085 3487 0
root@orangepizero:~#
root@orangepizero:~# ifconfig -a
eth0 Link encap:Ethernet HWaddr be:a7:9b:10:00:4b
inet addr:192.168.1.219 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: 2001:c90:8221:ac16:bca7:9bff:fe10:4b/64 Scope:Global
inet6 addr: fe80::bca7:9bff:fe10:4b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3285 errors:0 dropped:0 overruns:0 frame:0
TX packets:2915 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1506719 (1.5 MB) TX bytes:651284 (651.2 KB)
Interrupt:114
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:49 (49.0 B) TX bytes:49 (49.0 B)
tunl0 Link encap:IPIP Tunnel HWaddr
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@orangepizero:~#
root@orangepizero:~# dmesg
[ 0.000000] 9.900676] systemd[1]: Mounting /tmp...
[ 10.041494] systemd[1]: Starting udev Kernel Device Manager...
[ 10.060572] systemd[1]: Reached target Swap.
[ 10.140548] systemd[1]: Mounted /tmp.
[ 10.251323] systemd[1]: Started Entropy daemon using the HAVEGE algorithm.
[ 10.351473] systemd[1]: Starting Journal Service...
[ 10.370731] systemd[1]: Reached target Local File Systems.
[ 10.491521] systemd[1]: Starting Set console font and keymap...
[ 10.621108] systemd[1]: Starting Raise network interfaces...
[ 10.661400] systemd[1]: Started udev Kernel Device Manager.
[ 10.731757] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x77)
[ 10.731848] bmp085: probe of 0-0077 failed with error -70
[ 10.749129] systemd[1]: Started Journal Service.
[ 10.762541] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 10.762846] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, dev addr: 0x48)
[ 10.784258] dhd_module_init: in
[ 10.784303] ======== bcm_wlan_set_plat_data ========
[ 10.784333] bcm_wlan_get_oob_irq enter.
[ 10.784486] gpio [202] map to virq [10] ok
[ 10.784502] host_oob_irq: 10
[ 10.784517] host_oob_irq_flags=0x414
[ 10.784536] dhd_wifi_platform_load: Enter
[ 10.784613] Power-up adapter 'DHD generic adapter'
[ 10.784635] wifi_platform_set_power = 1
[ 10.784652] ======== PULL WL_REG_ON HIGH! ========
[ 10.784671] [wifi_pm]: set wl_reg_on 0 !
[ 10.894421] vmouse_input_dev_open
[ 10.950506] vmouse_input_dev_close
[ 11.128862] [wifi_pm]: set wl_reg_on 1 !
[ 11.872851] gmac0: probed
[ 11.873300] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00)
[ 11.958810] systemd-journald[208]: Received request to flush runtime journal from PID 1
[ 12.160173] wifi_platform_bus_enumerate device present 1
[ 12.160202] ======== Card detection to detect SDIO card! ========
[ 14.160185] failed to power up DHD generic adapter, 3 retry left
[ 14.176472] wifi_platform_set_power = 0
[ 14.176495] ======== PULL WL_REG_ON LOW! ========
[ 14.176514] wifi_platform_bus_enumerate device present 0
[ 14.176532] ======== Card detection to remove SDIO card! ========
[ 14.176584] wifi_platform_set_power = 1
[ 14.176600] ======== PULL WL_REG_ON HIGH! ========
[ 14.176619] [wifi_pm]: set wl_reg_on 0 !
[ 14.176907] mmc1: card 0001 removed
[ 14.177369] [mmc]: sdc1 power_supply is null
[ 14.376831] [wifi_pm]: set wl_reg_on 1 !
[ 14.880175] wifi_platform_bus_enumerate device present 1
[ 14.880207] ======== Card detection to detect SDIO card! ========
[ 14.881854] [mmc]: sdc1 power_supply is null
[ 14.939607] mmc1: new high speed SDIO card at address 0001
[ 15.870311] PHY: gmac0-0:00 - Link is Up - 100/Full
[ 16.880093] failed to power up DHD generic adapter, 2 retry left
[ 16.896390] wifi_platform_set_power = 0
[ 16.896416] ======== PULL WL_REG_ON LOW! ========
[ 16.896435] wifi_platform_bus_enumerate device present 0
[ 16.896453] ======== Card detection to remove SDIO card! ========
[ 16.896501] wifi_platform_set_power = 1
[ 16.896516] ======== PULL WL_REG_ON HIGH! ========
[ 16.896534] [wifi_pm]: set wl_reg_on 0 !
[ 16.896839] mmc1: card 0001 removed
[ 16.897317] [mmc]: sdc1 power_supply is null
[ 17.096852] [wifi_pm]: set wl_reg_on 1 !
[ 17.610154] wifi_platform_bus_enumerate device present 1
[ 17.610184] ======== Card detection to detect SDIO card! ========
[ 17.611853] [mmc]: sdc1 power_supply is null
[ 17.675289] mmc1: new high speed SDIO card at address 0001
[ 19.610134] failed to power up DHD generic adapter, 1 retry left
[ 19.626463] wifi_platform_set_power = 0
[ 19.626487] ======== PULL WL_REG_ON LOW! ========
[ 19.626507] wifi_platform_bus_enumerate device present 0
[ 19.626525] ======== Card detection to remove SDIO card! ========
[ 19.626588] wifi_platform_set_power = 1
[ 19.626604] ======== PULL WL_REG_ON HIGH! ========
[ 19.626622] [wifi_pm]: set wl_reg_on 0 !
[ 19.626948] mmc1: card 0001 removed
[ 19.627431] [mmc]: sdc1 power_supply is null
[ 19.827429] [wifi_pm]: set wl_reg_on 1 !
[ 20.330112] wifi_platform_bus_enumerate device present 1
[ 20.330140] ======== Card detection to detect SDIO card! ========
[ 20.331782] [mmc]: sdc1 power_supply is null
[ 20.389585] mmc1: new high speed SDIO card at address 0001
[ 22.330166] failed to power up DHD generic adapter, 0 retry left
[ 22.347850] wifi_platform_set_power = 0
[ 22.347875] ======== PULL WL_REG_ON LOW! ========
[ 22.347886] wifi_platform_bus_enumerate device present 0
[ 22.347895] ======== Card detection to remove SDIO card! ========
[ 22.347936] failed to power up DHD generic adapter, max retry reached**
[ 22.348005] unregister wifi platform drivers
[ 22.348015] wifi_platform_bus_enumerate device present 0
[ 22.348023] ======== Card detection to remove SDIO card! ========
[ 22.348048] dhd_module_init: Failed to load the driver, try cnt 3
[ 22.348091] ======== bcm_wlan_set_plat_data ========
[ 22.348109] bcm_wlan_get_oob_irq enter.
[ 22.348128] gpio [202] map to virq [10] ok
[ 22.348137] host_oob_irq: 10
[ 22.348144] host_oob_irq_flags=0x414
[ 22.348152] dhd_wifi_platform_load: Enter
[ 22.348190] mmc1: card 0001 removed
[ 22.348199] Power-up adapter 'DHD generic adapter'
[ 22.348207] wifi_platform_set_power = 1
[ 22.348213] ======== PULL WL_REG_ON HIGH! ========
[ 22.348221] [wifi_pm]: set wl_reg_on 0 !
[ 22.348503] [mmc]: sdc1 power_supply is null
[ 22.552147] [wifi_pm]: set wl_reg_on 1 !
[ 23.060126] wifi_platform_bus_enumerate device present 1
[ 23.060147] ======== Card detection to detect SDIO card! ========
[ 23.061605] [mmc]: sdc1 power_supply is null
[ 23.120867] mmc1: new high speed SDIO card at address 0001
[ 25.060154] failed to power up DHD generic adapter, 3 retry left
[ 25.076390] wifi_platform_set_power = 0
[ 25.076411] ======== PULL WL_REG_ON LOW! ========
[ 25.076420] wifi_platform_bus_enumerate device present 0
[ 25.076428] ======== Card detection to remove SDIO card! ========
[ 25.076465] wifi_platform_set_power = 1
[ 25.076473] ======== PULL WL_REG_ON HIGH! ========
[ 25.076483] [wifi_pm]: set wl_reg_on 0 !
[ 25.076704] mmc1: card 0001 removed
[ 25.076975] [mmc]: sdc1 power_supply is null
[ 25.276559] [wifi_pm]: set wl_reg_on 1 !
[ 25.780059] wifi_platform_bus_enumerate device present 1
[ 25.780077] ======== Card detection to detect SDIO card! ========
[ 25.781706] [mmc]: sdc1 power_supply is null
[ 25.836802] mmc1: new high speed SDIO card at address 0001
[ 27.780063] failed to power up DHD generic adapter, 2 retry left
[ 27.796278] wifi_platform_set_power = 0
[ 27.796295] ======== PULL WL_REG_ON LOW! ========
[ 27.796304] wifi_platform_bus_enumerate device present 0
[ 27.796313] ======== Card detection to remove SDIO card! ========
[ 27.796348] wifi_platform_set_power = 1
[ 27.796356] ======== PULL WL_REG_ON HIGH! ========
[ 27.796365] [wifi_pm]: set wl_reg_on 0 !
[ 27.796561] mmc1: card 0001 removed
[ 27.796830] [mmc]: sdc1 power_supply is null
[ 27.996405] [wifi_pm]: set wl_reg_on 1 !
[ 28.500123] wifi_platform_bus_enumerate device present 1
[ 28.500145] ======== Card detection to detect SDIO card! ========
[ 28.501787] [mmc]: sdc1 power_supply is null
[ 28.557609] mmc1: new high speed SDIO card at address 0001
[ 30.500114] failed to power up DHD generic adapter, 1 retry left
[ 30.516327] wifi_platform_set_power = 0
[ 30.516342] ======== PULL WL_REG_ON LOW! ========
[ 30.516353] wifi_platform_bus_enumerate device present 0
[ 30.516363] ======== Card detection to remove SDIO card! ========
[ 30.516404] wifi_platform_set_power = 1
[ 30.516414] ======== PULL WL_REG_ON HIGH! ========
[ 30.516426] [wifi_pm]: set wl_reg_on 0 !
[ 30.516639] mmc1: card 0001 removed
[ 30.516917] [mmc]: sdc1 power_supply is null
[ 30.716467] [wifi_pm]: set wl_reg_on 1 !
[ 31.220109] wifi_platform_bus_enumerate device present 1
[ 31.220126] ======== Card detection to detect SDIO card! ========
[ 31.221830] [mmc]: sdc1 power_supply is null
[ 31.281296] mmc1: new high speed SDIO card at address 0001
[ 33.220268] failed to power up DHD generic adapter, 0 retry left
[ 33.236792] wifi_platform_set_power = 0
[ 33.236832] ======== PULL WL_REG_ON LOW! ========
[ 33.236870] wifi_platform_bus_enumerate device present 0
[ 33.236905] ======== Card detection to remove SDIO card! ========
[ 33.237005] failed to power up DHD generic adapter, max retry reached**
[ 33.237117] unregister wifi platform drivers
[ 33.237155] wifi_platform_bus_enumerate device present 0
[ 33.237189] ======== Card detection to remove SDIO card! ========
[ 33.237281] dhd_module_init: Failed to load the driver, try cnt 2
[ 33.237431] ======== bcm_wlan_set_plat_data ========
[ 33.237478] bcm_wlan_get_oob_irq enter.
[ 33.237527] gpio [202] map to virq [10] ok
[ 33.237558] host_oob_irq: 10
[ 33.237585] host_oob_irq_flags=0x414
[ 33.237614] dhd_wifi_platform_load: Enter
[ 33.237680] mmc1: card 0001 removed
[ 33.237710] Power-up adapter 'DHD generic adapter'
[ 33.237742] wifi_platform_set_power = 1
[ 33.237766] ======== PULL WL_REG_ON HIGH! ========
[ 33.237795] [wifi_pm]: set wl_reg_on 0 !
[ 33.238725] [mmc]: sdc1 power_supply is null
[ 33.437880] [wifi_pm]: set wl_reg_on 1 !
[ 33.940091] wifi_platform_bus_enumerate device present 1
[ 33.940107] ======== Card detection to detect SDIO card! ========
[ 33.941811] [mmc]: sdc1 power_supply is null
[ 34.001290] mmc1: new high speed SDIO card at address 0001
[ 35.940256] failed to power up DHD generic adapter, 3 retry left
[ 35.956758] wifi_platform_set_power = 0
[ 35.956799] ======== PULL WL_REG_ON LOW! ========
[ 35.956838] wifi_platform_bus_enumerate device present 0
[ 35.956873] ======== Card detection to remove SDIO card! ========
[ 35.956967] wifi_platform_set_power = 1
[ 35.956998] ======== PULL WL_REG_ON HIGH! ========
[ 35.957035] [wifi_pm]: set wl_reg_on 0 !
[ 35.957593] mmc1: card 0001 removed
[ 35.958514] [mmc]: sdc1 power_supply is null
[ 36.157264] [wifi_pm]: set wl_reg_on 1 !
[ 36.660105] wifi_platform_bus_enumerate device present 1
[ 36.660128] ======== Card detection to detect SDIO card! ========
[ 36.661788] [mmc]: sdc1 power_supply is null
[ 36.717523] mmc1: new high speed SDIO card at address 0001
[ 38.660161] failed to power up DHD generic adapter, 2 retry left
[ 38.676678] wifi_platform_set_power = 0
[ 38.676719] ======== PULL WL_REG_ON LOW! ========
[ 38.676757] wifi_platform_bus_enumerate device present 0
[ 38.676792] ======== Card detection to remove SDIO card! ========
[ 38.676882] wifi_platform_set_power = 1
[ 38.676913] ======== PULL WL_REG_ON HIGH! ========
[ 38.676949] [wifi_pm]: set wl_reg_on 0 !
[ 38.677493] mmc1: card 0001 removed
[ 38.678404] [mmc]: sdc1 power_supply is null
[ 38.877173] [wifi_pm]: set wl_reg_on 1 !
[ 39.380092] wifi_platform_bus_enumerate device present 1
[ 39.380108] ======== Card detection to detect SDIO card! ========
[ 39.381789] [mmc]: sdc1 power_supply is null
[ 39.445070] mmc1: new high speed SDIO card at address 0001
[ 41.380266] failed to power up DHD generic adapter, 1 retry left
[ 41.396802] wifi_platform_set_power = 0
[ 41.396843] ======== PULL WL_REG_ON LOW! ========
[ 41.396880] wifi_platform_bus_enumerate device present 0
[ 41.396915] ======== Card detection to remove SDIO card! ========
[ 41.397011] wifi_platform_set_power = 1
[ 41.397042] ======== PULL WL_REG_ON HIGH! ========
[ 41.397078] [wifi_pm]: set wl_reg_on 0 !
[ 41.397646] mmc1: card 0001 removed
[ 41.398576] [mmc]: sdc1 power_supply is null
[ 41.599291] [wifi_pm]: set wl_reg_on 1 !
[ 42.100118] wifi_platform_bus_enumerate device present 1
[ 42.100134] ======== Card detection to detect SDIO card! ========
[ 42.101858] [mmc]: sdc1 power_supply is null
[ 42.161920] mmc1: new high speed SDIO card at address 0001
[ 44.100289] failed to power up DHD generic adapter, 0 retry left
[ 44.116815] wifi_platform_set_power = 0
[ 44.116857] ======== PULL WL_REG_ON LOW! ========
[ 44.116897] wifi_platform_bus_enumerate device present 0
[ 44.116931] ======== Card detection to remove SDIO card! ========
[ 44.117031] failed to power up DHD generic adapter, max retry reached**
[ 44.117146] unregister wifi platform drivers
[ 44.117185] wifi_platform_bus_enumerate device present 0
[ 44.117219] ======== Card detection to remove SDIO card! ========
[ 44.117310] dhd_module_init: Failed to load the driver, try cnt 1
[ 44.117460] ======== bcm_wlan_set_plat_data ========
[ 44.117507] bcm_wlan_get_oob_irq enter.
[ 44.117557] gpio [202] map to virq [10] ok
[ 44.117588] host_oob_irq: 10
[ 44.117615] host_oob_irq_flags=0x414
[ 44.117644] dhd_wifi_platform_load: Enter
[ 44.117679] mmc1: card 0001 removed
[ 44.117763] Power-up adapter 'DHD generic adapter'
[ 44.117800] wifi_platform_set_power = 1
[ 44.117829] ======== PULL WL_REG_ON HIGH! ========
[ 44.117864] [wifi_pm]: set wl_reg_on 0 !
[ 44.118600] [mmc]: sdc1 power_supply is null
[ 44.317960] [wifi_pm]: set wl_reg_on 1 !
[ 44.820096] wifi_platform_bus_enumerate device present 1
[ 44.820110] ======== Card detection to detect SDIO card! ========
[ 44.821782] [mmc]: sdc1 power_supply is null
[ 44.881709] mmc1: new high speed SDIO card at address 0001
[ 46.820251] failed to power up DHD generic adapter, 3 retry left
[ 46.836772] wifi_platform_set_power = 0
[ 46.836815] ======== PULL WL_REG_ON LOW! ========
[ 46.836853] wifi_platform_bus_enumerate device present 0
[ 46.836888] ======== Card detection to remove SDIO card! ========
[ 46.836969] wifi_platform_set_power = 1
[ 46.837001] ======== PULL WL_REG_ON HIGH! ========
[ 46.837037] [wifi_pm]: set wl_reg_on 0 !
[ 46.837629] mmc1: card 0001 removed
[ 46.838537] [mmc]: sdc1 power_supply is null
[ 47.037272] [wifi_pm]: set wl_reg_on 1 !
[ 47.540085] wifi_platform_bus_enumerate device present 1
[ 47.540100] ======== Card detection to detect SDIO card! ========
[ 47.541768] [mmc]: sdc1 power_supply is null
[ 47.601418] mmc1: new high speed SDIO card at address 0001
[ 49.540274] failed to power up DHD generic adapter, 2 retry left
[ 49.556823] wifi_platform_set_power = 0
[ 49.556864] ======== PULL WL_REG_ON LOW! ========
[ 49.556902] wifi_platform_bus_enumerate device present 0
[ 49.556937] ======== Card detection to remove SDIO card! ========
[ 49.557023] wifi_platform_set_power = 1
[ 49.557054] ======== PULL WL_REG_ON HIGH! ========
[ 49.557090] [wifi_pm]: set wl_reg_on 0 !
[ 49.557687] mmc1: card 0001 removed
[ 49.558607] [mmc]: sdc1 power_supply is null
[ 49.757222] [wifi_pm]: set wl_reg_on 1 !
[ 50.260188] wifi_platform_bus_enumerate device present 1
[ 50.260235] ======== Card detection to detect SDIO card! ========
[ 50.261993] [mmc]: sdc1 power_supply is null
[ 50.322017] mmc1: new high speed SDIO card at address 0001
[ 52.260202] failed to power up DHD generic adapter, 1 retry left
[ 52.276714] wifi_platform_set_power = 0
[ 52.276755] ======== PULL WL_REG_ON LOW! ========
[ 52.276793] wifi_platform_bus_enumerate device present 0
[ 52.276828] ======== Card detection to remove SDIO card! ========
[ 52.276914] wifi_platform_set_power = 1
[ 52.276944] ======== PULL WL_REG_ON HIGH! ========
[ 52.276980] [wifi_pm]: set wl_reg_on 0 !
[ 52.277541] mmc1: card 0001 removed
[ 52.278455] [mmc]: sdc1 power_supply is null
[ 52.478307] [wifi_pm]: set wl_reg_on 1 !
[ 52.980211] wifi_platform_bus_enumerate device present 1
[ 52.980260] ======== Card detection to detect SDIO card! ========
[ 52.982024] [mmc]: sdc1 power_supply is null
[ 53.042133] mmc1: new high speed SDIO card at address 0001
[ 54.980212] failed to power up DHD generic adapter, 0 retry left
[ 54.996713] wifi_platform_set_power = 0
[ 54.996756] ======== PULL WL_REG_ON LOW! ========
[ 54.996794] wifi_platform_bus_enumerate device present 0
[ 54.996829] ======== Card detection to remove SDIO card! ========
[ 54.996915] failed to power up DHD generic adapter, max retry reached**
[ 54.997025] unregister wifi platform drivers
[ 54.997063] wifi_platform_bus_enumerate device present 0
[ 54.997098] ======== Card detection to remove SDIO card! ========
[ 54.997193] dhd_module_init: Failed to load the driver, try cnt 0
[ 54.997338] dhd_module_init: Failed to load driver max retry reached**
[ 54.997379] dhd_module_init: Exit err=-19
[ 54.997547] mmc1: card 0001 removed
[ 54.998431] [mmc]: sdc1 power_supply is null
[ 55.093672] dhd_module_init: in
[ 55.093694] ======== bcm_wlan_set_plat_data ========
[ 55.093712] bcm_wlan_get_oob_irq enter.
[ 55.093728] gpio [202] map to virq [10] ok
[ 55.093735] host_oob_irq: 10
[ 55.093742] host_oob_irq_flags=0x414
[ 55.093750] dhd_wifi_platform_load: Enter
[ 55.093796] Power-up adapter 'DHD generic adapter'
[ 55.093808] wifi_platform_set_power = 1
[ 55.093815] ======== PULL WL_REG_ON HIGH! ========
[ 55.093825] [wifi_pm]: set wl_reg_on 0 !
[ 55.293864] [wifi_pm]: set wl_reg_on 1 !
[ 55.800079] wifi_platform_bus_enumerate device present 1
[ 55.800095] ======== Card detection to detect SDIO card! ========
[ 55.801766] [mmc]: sdc1 power_supply is null
[ 55.862623] mmc1: new high speed SDIO card at address 0001
[ 57.800333] failed to power up DHD generic adapter, 3 retry left
[ 57.816844] wifi_platform_set_power = 0
[ 57.816886] ======== PULL WL_REG_ON LOW! ========
[ 57.816924] wifi_platform_bus_enumerate device present 0
[ 57.816959] ======== Card detection to remove SDIO card! ========
[ 57.817042] wifi_platform_set_power = 1
[ 57.817073] ======== PULL WL_REG_ON HIGH! ========
[ 57.817108] [wifi_pm]: set wl_reg_on 0 !
[ 57.817634] mmc1: card 0001 removed
[ 57.818522] [mmc]: sdc1 power_supply is null
[ 58.021371] [wifi_pm]: set wl_reg_on 1 !
[ 58.530068] wifi_platform_bus_enumerate device present 1
[ 58.530088] ======== Card detection to detect SDIO card! ========
[ 58.531689] [mmc]: sdc1 power_supply is null
[ 58.586807] mmc1: new high speed SDIO card at address 0001
[ 60.530192] failed to power up DHD generic adapter, 2 retry left
[ 60.546674] wifi_platform_set_power = 0
[ 60.546717] ======== PULL WL_REG_ON LOW! ========
[ 60.546755] wifi_platform_bus_enumerate device present 0
[ 60.546790] ======== Card detection to remove SDIO card! ========
[ 60.546880] wifi_platform_set_power = 1
[ 60.546912] ======== PULL WL_REG_ON HIGH! ========
[ 60.546948] [wifi_pm]: set wl_reg_on 0 !
[ 60.547465] mmc1: card 0001 removed
[ 60.548375] [mmc]: sdc1 power_supply is null
[ 60.751289] [wifi_pm]: set wl_reg_on 1 !
[ 61.260051] wifi_platform_bus_enumerate device present 1
[ 61.260066] ======== Card detection to detect SDIO card! ========
[ 61.261678] [mmc]: sdc1 power_supply is null
[ 61.326151] mmc1: new high speed SDIO card at address 0001
[ 63.260066] failed to power up DHD generic adapter, 1 retry left
[ 63.276541] wifi_platform_set_power = 0
[ 63.276583] ======== PULL WL_REG_ON LOW! ========
[ 63.276621] wifi_platform_bus_enumerate device present 0
[ 63.276655] ======== Card detection to remove SDIO card! ========
[ 63.276742] wifi_platform_set_power = 1
[ 63.276774] ======== PULL WL_REG_ON HIGH! ========
[ 63.276810] [wifi_pm]: set wl_reg_on 0 !
[ 63.277339] mmc1: card 0001 removed
[ 63.278224] [mmc]: sdc1 power_supply is null
[ 63.481294] [wifi_pm]: set wl_reg_on 1 !
[ 63.990052] wifi_platform_bus_enumerate device present 1
＜略＞
[ 356.596718] ======== PULL WL_REG_ON LOW! ========
[ 356.596755] wifi_platform_bus_enumerate device present 0
[ 356.596790] ======== Card detection to remove SDIO card! ========
[ 356.596881] wifi_platform_set_power = 1
[ 356.596912] ======== PULL WL_REG_ON HIGH! ========
[ 356.596948] [wifi_pm]: set wl_reg_on 0 !
[ 356.597508] mmc1: card 0001 removed
[ 356.598394] [mmc]: sdc1 power_supply is null
[ 356.801336] [wifi_pm]: set wl_reg_on 1 !
[ 357.310094] wifi_platform_bus_enumerate device present 1
[ 357.310108] ======== Card detection to detect SDIO card! ========
[ 357.311794] [mmc]: sdc1 power_supply is null
[ 357.371976] mmc1: new high speed SDIO card at address 0001
root@orangepizero:~#
