スモールボード(ラズパイ系) – ページ 10

https://mega.nz/#F!WwkGDAja!VEQQ5tsurQehPpwJ6Oc3Bwにあったという、Debian_Server_Jessie_A64_Win_V0_0_1.img.tar.gz をもらいまして、Orange Pi Winに書き込んで見ました。

ユーザはroot/root、もしくはorangepi/orangepiです。
なお、rootはssh経由ではログインできない設定でした。
また、ファイル名に「Server」とあるようにX-Windowは起動しない設定です。

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Jan  1 00:03:14 2010 from 192.168.1.41
orangepi@Orangepi:~$ sudo bash
[sudo] password for orangepi:
root@Orangepi:/home/orangepi# uname -a
Linux Orangepi 3.10.102 #97 SMP PREEMPT Tue Nov 22 18:18:57 CST 2016 aarch64 GNU/Linux
root@Orangepi:/home/orangepi# df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/mmcblk0p2  1.1G  657M  352M  66% /
devtmpfs        458M     0  458M   0% /dev
tmpfs           491M     0  491M   0% /dev/shm
tmpfs           491M  6.6M  484M   2% /run
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           491M     0  491M   0% /sys/fs/cgroup
/dev/mmcblk0p1   50M   13M   38M  25% /boot
root@Orangepi:/home/orangepi#

kernelは3.10.102
NICはオンボードのみ認識。
無線LANのドライバは読み込まれて折らず。

root@Orangepi:/home/orangepi# ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
    link/ether de:df:5a:ea:b9:95 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether d2:80:45:52:9b:6e brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.132/24 brd 192.168.1.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::d080:45ff:fe52:9b6e/64 scope link
       valid_lft forever preferred_lft forever
4: sit0: <NOARP> mtu 1480 qdisc noop state DOWN group default
    link/sit 0.0.0.0 brd 0.0.0.0
root@Orangepi:/home/orangepi# lsmod
Module                  Size  Used by
vfe_v4l2              751715  0
ir_rc5_decoder         12487  0
ir_lirc_codec          12756  0
lirc_dev               17032  1 ir_lirc_codec
ir_mce_kbd_decoder     12628  0
ir_sanyo_decoder       12491  0
ir_sony_decoder        12489  0
ir_jvc_decoder         12487  0
videobuf2_dma_contig    17668  1 vfe_v4l2
ir_nec_decoder         12487  0
ir_rc6_decoder         12520  0
videobuf2_memops       12546  1 videobuf2_dma_contig
videobuf2_core         30952  1 vfe_v4l2
sunxi_ir_rx            12902  0
vfe_io                 34085  1 vfe_v4l2
cedar_ve               17368  0
ss                     33083  0
w1_gpio                12739  0
wire                   23744  1 w1_gpio
root@Orangepi:/home/orangepi#

1000Mbpsのスイッチなのに、100Mbpsでリンクアップしてる。

[   16.698383] sunxi-gmac 1c30000.eth eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (1c30000.eth-0:00)
[   29.483728] libphy: 1c30000.eth-0:00 - Link is Up - 100/Full

う～ん・・・
やっぱり開発中版というだけのことはある模様。

dmesgの内容は下記でした。

root@Orangepi:/home/orangepi# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.102 (orange@orange-All-Series) (gcc version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.01-3) ) #97 SMP PREEMPT Tue Nov 22 18:18:57 CST 2016
[    0.000000] CPU: AArch64 Processor [410fd034] revision 4
[    0.000000] Machine: sun50iw1p1
[    0.000000] cma: CMA: reserved 64 MiB at 7c000000
[    0.000000] On node 0 totalpages: 258048
[    0.000000]   DMA zone: 3528 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 258048 pages, LIFO batch:31
[    0.000000] script_init enter!
[    0.000000] script buffer is NULL!
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc03af98000 s19136 r8192 d21824 u49152
[    0.000000] pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 254520
[    0.000000] Kernel command line: console=tty0 console=ttyS0,115200n8 no_console_suspend earlycon=uart,mmio32,0x01c28000 mac_addr=d2:80:45:52:9b:6e root=/dev/mmcblk0p2 ro rootwait
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Memory: 1008MB = 1008MB total
[    0.000000] Memory: 936740k/936740k available, 95452k reserved
[    0.000000] Virtual kernel memory layout:
    vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000   (245759 MB)
    vmemmap : 0xffffffbc00e38000 - 0xffffffbc01c00000   (    13 MB)
    modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
    memory  : 0xffffffc000000000 - 0xffffffc03f000000   (  1008 MB)
      .init : 0xffffffc0009d4000 - 0xffffffc000a57ac0   (   527 kB)
      .text : 0xffffffc000080000 - 0xffffffc0009d3824   (  9551 kB)
      .data : 0xffffffc000a58000 - 0xffffffc000babdc0   (  1360 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    7.903019] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    7.903049] pid_max: default: 32768 minimum: 301
[    7.903155] Security Framework initialized
[    7.903211] AppArmor: AppArmor initialized
[    7.903257] Mount-cache hash table entries: 256
[    7.913861] Initializing cgroup subsys memory
[    7.913923] Initializing cgroup subsys devices
[    7.913940] Initializing cgroup subsys freezer
[    7.913957] Initializing cgroup subsys blkio
[    7.913972] Initializing cgroup subsys perf_event
[    7.913994] Initializing cgroup subsys hugetlb
[    7.914067] ftrace: allocating 27114 entries in 106 pages
[    7.944573] CPU0: update cpu_power 1968128
[    7.944608] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[    7.945539] virtual base = 0xffffff800000a000.
[    7.945559] gicd_base = 0xffffff800000c000.
[    7.945572] gicc_base = 0xffffff800000e000.
[    7.946136] CPU1: Booted secondary processor
[    7.946160] CPU1: update cpu_power 1968128
[    7.948761] CPU2: Booted secondary processor
[    7.948772] CPU2: update cpu_power 1968128
[    7.952878] CPU3: Booted secondary processor
[    7.952889] CPU3: update cpu_power 1968128
[    7.952966] Brought up 4 CPUs
[    7.953044] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    7.953653] devtmpfs: initialized
[    7.958369] atomic64 test passed
[    7.958390] pinctrl core: initialized pinctrl subsystem
[    7.960843] NET: Registered protocol family 16
[    7.961095] script_sysfs_init success
[    7.961314] dump_class_init,806, success
[    7.961574] vdso: 2 pages (1 code, 1 data) at base ffffffc000a5d000
[    7.961606] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    7.962872] software IO TLB [mem 0x79c00000-0x7a000000] (4MB) mapped at [ffffffc038c00000-ffffffc038ffffff]
[    7.963931] DMA: preallocated 256 KiB pool for atomic allocations
[    7.964077] Serial: AMBA PL011 UART driver
[    7.964193] axp81x_board_init: axp regl_devs num = 23
[    7.964338] pll_audio-set_default_rate=24576000 success!
[    7.964370] pll_video0-set_default_rate=297000000 success!
[    7.964453] pll_video1-set_default_rate=297000000 success!
[    7.964526] pll_de-set_default_rate=297000000 success!
[    7.965275] de-set_default_source=pll_de success!
[    7.965291] de-set_default_rate=297000000 success!
[    7.965347] tcon0-set_default_source=pll_mipi success!
[    7.965390] tcon1-set_default_source=pll_video0 success!
[    7.965627] hdmi-set_default_source=pll_video0 success!
[    7.967871] sun50i-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    7.968051] [sun50iw1p1_pinctrl_probe][838]
[    7.969724] sun50i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    7.970388] sunxi hwspinlock vbase:0xffffff800005c000
[    7.976201] sunxi_chipid_probe,150: soc bin:0
[    7.976222] chipid-sunxi serial 000000000000
[    7.980955] bio: create slab <bio-0> at 0
[    7.981322] pwm module init!
[    7.982563] SCSI subsystem initialized
[    7.982703] usbcore: registered new interface driver usbfs
[    7.982746] usbcore: registered new interface driver hub
[    7.982821] usbcore: registered new device driver usb
[    7.983809] Linux video capture interface: v2.00
[    7.984278] [ARISC] :sunxi-arisc driver v1.10
[    7.991144] [ARISC] :sunxi-arisc driver v1.10 startup succeeded
[    7.991390] Advanced Linux Sound Architecture Driver Initialized.
[    7.991750] NetLabel: Initializing
[    7.991764] NetLabel:  domain hash size = 128
[    7.991777] NetLabel:  protocols = UNLABELED CIPSOv4
[    7.991825] NetLabel:  unlabeled traffic allowed by default
[    7.991991] [pm]aw_pm_init!
[    7.992057] rtc physical base = 0x0000000001f00000 .
[    7.992100] np name = /soc@01c00000/rtc@01f00000.
[    7.992116] base = ffffff8000072100, len = 4.
[    7.992130] pmu name: pmu0 .
[    7.992168] pmu0_enable = 0x1.
[    7.992180] pmux_id = 0x6.
[    7.992192] pmux_twi_id = 0x1.
[    7.992204] pmux_twi_addr = 0x34.
[    7.992215] pmu name: pmu1 .
[    7.992266] Warning: can not find np for pmu1.
[    7.992491] add_sys_pwr_dm: get ldo name  for id: vcc-lpddr failed
[    7.992657] after inited: sys_mask config = 0x4a55.
[    7.992689] Warning: can not find np for dynamic_standby_para.
[    7.992811] [pm]valid
[    7.992820] [pm]valid
[    7.992830] Notice: sun9i&sun8iw5&sun50i not need support normal standby,                            change to super standby.
[    7.993035] Switching to clocksource arch_sys_counter
[    8.003868] AppArmor: AppArmor Filesystem Enabled
[    8.010753] NET: Registered protocol family 2
[    8.011476] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[    8.011638] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    8.011812] TCP: Hash tables configured (established 8192 bind 8192)
[    8.011895] TCP: reno registered
[    8.011913] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    8.011953] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    8.012169] NET: Registered protocol family 1
[    8.012457] RPC: Registered named UNIX socket transport module.
[    8.012475] RPC: Registered udp transport module.
[    8.012488] RPC: Registered tcp transport module.
[    8.012502] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.012671] Trying to unpack rootfs image as initramfs...
[    8.058736] Freeing initrd memory: 1064K (ffffffc035dab000 - ffffffc035eb5000)
[    8.059271] kvm [1]: Using HYP init bounce page @79b84000
[    8.059733] kvm [1]: interrupt-controller@1c84000 IRQ25
[    8.060138] kvm [1]: timer IRQ27
[    8.060161] kvm [1]: Hyp mode initialized successfully
[    8.061945] lock super standby defaultly!
[    8.061999] lookup_scene_lock_name: new scene lock super_standby
[    8.062016] scene_lock_init name=super_standby
[    8.062032] scene_lock: super_standby, type 5, count 1
[    8.062433] audit: initializing netlink socket (disabled)
[    8.062494] type=2000 audit(0.140:1): initialized
[    8.063096] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    8.063565] VFS: Disk quotas dquot_6.5.2
[    8.063684] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    8.064106] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    8.064651] NFS: Registering the id_resolver key type
[    8.064701] Key type id_resolver registered
[    8.064715] Key type id_legacy registered
[    8.064735] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    8.064890] NTFS driver 2.1.30 [Flags: R/W].
[    8.065065] fuse init (API version 7.22)
[    8.065269] msgmni has been set to 1959
[    8.066222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    8.066326] io scheduler noop registered
[    8.066341] io scheduler deadline registered
[    8.066375] io scheduler cfq registered (default)
[    8.066912] [DISP]disp_module_init
[    8.067327] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail
[    8.067351] [DISP] boot_disp:0x0
[    8.067922] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[    8.068079] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[    8.068236] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[    8.069310] [DISP] disp_boot_para_parse,line:301:of_property_read disp.fb_base fail
[    8.069333] [DISP] fb_base:0x0
[    8.106488] Console: switching to colour frame buffer device 240x67
[    8.134983] [DISP]disp_module_init finish
[    8.135459] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[    8.135613] sw_console_setup()1173 - console setup baud 115200 parity n bits 8, flow n
[    9.118523] console [ttyS0] enabled
[    9.122865] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[    9.129808] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
[    9.136671] sun50i-pinctrl 1c20800.pinctrl: can not get function on pin PH4
[    9.144451] sun50i-pinctrl 1c20800.pinctrl: can not get function on pin PH5
[    9.152217] sun50i-pinctrl 1c20800.pinctrl: can not get function on pin PH6
[    9.159993] sun50i-pinctrl 1c20800.pinctrl: can not get function on pin PH7
[    9.167758] pinctrl core: failed to register map default (0): invalid type given
[    9.176057] sun50i-pinctrl 1c20800.pinctrl: can not get function on pin PH4
[    9.183834] sun50i-pinctrl 1c20800.pinctrl: can not get function on pin PH5
[    9.191600] sun50i-pinctrl 1c20800.pinctrl: can not get function on pin PH6
[    9.199379] sun50i-pinctrl 1c20800.pinctrl: can not get function on pin PH7
[    9.207145] pinctrl core: failed to register map default (0): invalid type given
[    9.215396] sw_uart_request_gpio()756 - UART3 devm_pinctrl_get() failed! return -22
[    9.223939] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
[    9.231000] misc dump reg init
[    9.234556] [drm] Initialized drm 1.1.0 20060810
[    9.244228] brd: module loaded
[    9.249990] loop: module loaded
[    9.253785] sunxi-bt bt.28: bt_power_name (vcc-wifi-io)
[    9.259610] sunxi-bt bt.28: io_regulator_name (vcc-wifi-io)
[    9.265859] sunxi-bt bt.28: bt_rst gpio=356  mul-sel=1  pull=-1  drv_level=-1  data=0
[    9.274627] sunxi-bt bt.28: clk not config
[    9.279258] sunxi-bt bt.28: block state already is 1
[    9.284985] sunxi-wlan wlan.27: wlan_busnum (1)
[    9.290035] sunxi-wlan wlan.27: wlan_power_name (vcc-wifi)
[    9.296157] sunxi-wlan wlan.27: io_regulator_name (vcc-wifi-io)
[    9.302767] sunxi-wlan wlan.27: wlan_regon gpio=360  mul-sel=1  pull=-1  drv_level=-1  data=0
[    9.312293] sunxi-wlan wlan.27: wlan_hostwake gpio=359  mul-sel=6  pull=-1  drv_level=-1  data=0
[    9.322704] tun: Universal TUN/TAP device driver, 1.6
[    9.328331] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    9.335830] WARNING: Get ephy clock is failed
[    9.341001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.348398] get ehci0-controller, regulator_io is no nocare
[    9.360717] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c56d50, 0x:ffffff80000aa000, irq_no:68
[    9.380420] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.396821] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
[    9.413022] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc00050009c
[    9.439584] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
[    9.454118] hub 1-0:1.0: USB hub found
[    9.464641] hub 1-0:1.0: 1 port detected
[    9.475391] scene_lock_init name=ehci_standby
[    9.486571] get ehci1-controller, regulator_io is no nocare
[    9.499249] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000c56fa0, 0x:ffffff80000b2000, irq_no:6a
[    9.519325] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.536026] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 2
[    9.552475] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc00050009c
[    9.587182] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
[    9.601489] ehci_irq: highspeed device connect
[    9.613079] hub 2-0:1.0: USB hub found
[    9.623758] hub 2-0:1.0: 1 port detected
[    9.634636] scene_lock_init name=ehci_standby
[    9.645980] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    9.659324] get ohci0-controller, regulator_io is no nocare
[    9.671806] hci: request ohci0-controller gpio:103
[    9.683325] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c568b0
[    9.699947] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    9.715982] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 3
[    9.731946] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0xffffffffffffffff
[    9.807934] hub 3-0:1.0: USB hub found
[    9.818453] hub 3-0:1.0: 1 port detected
[    9.829228] scene_lock_init name=ohci_standby
[    9.840324] get ohci1-controller, regulator_io is no nocare
[    9.852724] hci: request ohci1-controller gpio:1027
[    9.864408] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000c56b00
[    9.881184] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    9.897389] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 4
[    9.913541] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0xffffffffffffffff
[    9.951267] usb 2-1: new high-speed USB device number 2 using sunxi-ehci
[    9.985041] hub 4-0:1.0: USB hub found
[    9.995809] hub 4-0:1.0: 1 port detected
[   10.006905] scene_lock_init name=ohci_standby
[   10.018707] usbcore: registered new interface driver usb-storage
[   10.032186] usbcore: registered new interface driver ums-alauda
[   10.045452] usbcore: registered new interface driver ums-cypress
[   10.058703] usbcore: registered new interface driver ums-datafab
[   10.071860] usbcore: registered new interface driver ums_eneub6250
[   10.085130] usbcore: registered new interface driver ums-freecom
[   10.098151] usbcore: registered new interface driver ums-isd200
[   10.111088] usbcore: registered new interface driver ums-jumpshot
[   10.111378] hub 2-1:1.0: USB hub found
[   10.111543] hub 2-1:1.0: 4 ports detected
[   10.145243] usbcore: registered new interface driver ums-karma
[   10.157979] usbcore: registered new interface driver ums-onetouch
[   10.170931] usbcore: registered new interface driver ums-realtek
[   10.183754] usbcore: registered new interface driver ums-sddr09
[   10.196438] usbcore: registered new interface driver ums-sddr55
[   10.209093] usbcore: registered new interface driver ums-usbat
[   10.221667] usbcore: registered new interface driver usbserial
[   10.234096] usbcore: registered new interface driver usbserial_generic
[   10.247206] usbserial: USB Serial support registered for generic
[   10.259899] mousedev: PS/2 mouse device common for all mice
[   10.272368] input: sunxi-keyboard as /devices/virtual/input/input0
[   10.285558] sunxi-rtc 1f00000.rtc: rtc core: registered rtc-sunxi as rtc0
[   10.298925] sunxi-rtc 1f00000.rtc: RTC enabled
[   10.309842] i2c /dev entries driver
[   10.355272] input: axp81x-supplyer as /devices/platform/axp81x_board/axp81x-supplyer.47/input/input1
[   10.374577] sunxi budget cooling probe start !
[   10.384381] usb 2-1.2: new high-speed USB device number 3 using sunxi-ehci
[   10.398477] CPU freq cooling register Success
[   10.409023] CPU hotplug cooling register Success
[   10.419880] CPU budget cooling register Success
[   10.430851] sunxi gpu cooling probe start !
[   10.441180] CPU gpu cooling register Success
[   10.454382] cpuidle: using governor ladder
[   10.463782] cpuidle: using governor menu
[   10.473494] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Nov 22 2016 at 18:17:53
[   10.491301] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str none
[   10.502945] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str none
[   10.503376] hub 2-1.2:1.0: USB hub found
[   10.503666] hub 2-1.2:1.0: 4 ports detected
[   10.533038] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdc
[   10.545040] sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found
[   10.556106] sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found
[   10.567668] sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166.
[   10.578156] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[   10.594006] sunxi-mmc 1c0f000.sdmmc: no vqmmc,Check if there is regulator
[   10.620379] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   10.649926] sunxi-mmc 1c0f000.sdmmc: base:0xffffff80000c6000 irq:92
[   10.661977] sunxi-mmc 1c10000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Nov 22 2016 at 18:17:53
[   10.679833] sunxi-mmc 1c10000.sdmmc: Can't get vmmc regulator string
[   10.691701] sunxi-mmc 1c10000.sdmmc: Can't get vqmmc regulator string
[   10.703682] sunxi-mmc 1c10000.sdmmc: Can't get vdmmc regulator string
[   10.715602] get() with no identifier
[   10.724355] get() with no identifier
[   10.733034] get() with no identifier
[   10.741584] sunxi-mmc 1c10000.sdmmc: No vmmc regulator found
[   10.752374] sunxi-mmc 1c10000.sdmmc: No vqmmc regulator found
[   10.763242] sunxi-mmc 1c10000.sdmmc: No vdmmc regulator found
[   10.764853] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   10.767236] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   10.772374] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
[   10.772413] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
[   10.774782] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
[   10.853735] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[   10.856806] usb 2-1.2.1: new low-speed USB device number 4 using sunxi-ehci
[   10.863689] mmc0: host does not support reading read-only switch. assuming write-enable.
[   10.865516] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
[   10.865559] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
[   10.865659] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 4 timing SD-HS(SDR25) dt B
[   10.865679] mmc0: new high speed SDHC card at address 0001
[   10.954393] mmcblk0: mmc0:0001 00000 14.8 GiB
[   10.954403] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
[   10.964794] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   10.984479] sunxi-mmc 1c10000.sdmmc: base:0xffffff80000ce000 irq:93
[   10.985078] usbcore: registered new interface driver usbhid
[   10.985079] usbhid: USB HID core driver
[   11.027293]  mmcblk0: p1 p2
[   11.035952] sndhdmi sound.7:  sndhdmi <-> 1c22800.daudio mapping ok
[   11.037685] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   11.040081] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   11.048282] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   11.049119] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[   11.116119] TCP: cubic registered
[   11.125248] NET: Registered protocol family 10
[   11.135890] input: CHICONY USB NetVista Full Width Keyboard as /devices/soc.0/1c1b000.ehci1-controller/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input2
[   11.156551] hid-generic 0003:04B3:3025.0001: input: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-sunxi-ehci-1.2.1/input0
[   11.156775] sit: IPv6 over IPv4 tunneling driver
[   11.157131] NET: Registered protocol family 17
[   11.157180] 8021q: 802.1Q VLAN Support v1.8
[   11.157221] Key type dns_resolver registered
[   11.157388] Registering SWP/SWPB emulation handler
[   11.157645] registered taskstats version 1
[   11.240080] Key type encrypted registered
[   11.250088] AppArmor: AppArmor sha1 policy hashing enabled
[   11.262043] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail
[   11.276330] [DISP] boot_disp:0x0
[   11.286273] [HDMI] power vcc-hdmi-33
[   11.296246] [HDMI] cec support = 0
[   11.319288] usb 2-1.2.2: new low-speed USB device number 5 using sunxi-ehci
[   11.408611] sunxi-rtc 1f00000.rtc: setting system clock to 2010-01-01 00:05:46 UTC (1262304346)
[   11.424438] input: sunxi-ths as /devices/virtual/input/input3
[   11.436611] thermal thermal_zone0: failed to read out thermal zone 0
[   11.449758] ALSA device list:
[   11.455040] input: KYE ADNS6000 Optical Mouse as /devices/soc.0/1c1b000.ehci1-controller/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.0/input/input4
[   11.478247]   #0: sndhdmi
[   11.487212] hid-generic 0003:0458:005E.0002: input: USB HID v1.10 Mouse [KYE ADNS6000 Optical Mouse] on usb-sunxi-ehci-1.2.2/input0
[   11.506769] Freeing unused kernel memory: 524K (ffffffc0009d4000 - ffffffc000a57000)
[   11.583567] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[   11.599648] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[   11.637054] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   11.914396] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[   11.935537] systemd[1]: Detected architecture 'arm64'.
[   11.958621] [ehci0-controller]: sunxi_usb_disable_ehci
[   11.970637] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c56d50
[   11.987438] scene_lock_destroy name=ehci_standby
[   11.999050] sunxi-ehci 1c1a000.ehci0-controller: remove, state 4
[   12.009681] systemd[1]: Set hostname to <Orangepi>.
[   12.024324] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10
[   12.030471] usb usb1: USB disconnect, device number 1
[   12.054554] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered
[   12.068859] [ohci0-controller]: sunxi_usb_disable_ohci
[   12.081604] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c568b0
[   12.099167] scene_lock_destroy name=ohci_standby
[   12.111559] sunxi-ohci 1c1a000.ohci0-controller: remove, state 4
[   12.125621] usb usb3: USB disconnect, device number 1
[   12.138926] sunxi-ohci 1c1a000.ohci0-controller: USB bus 3 deregistered
[   12.153552] [ehci0-controller]: sunxi_usb_enable_ehci
[   12.166332] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c56d50, 0x:ffffff80000aa000, irq_no:68
[   12.187028] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.204483] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
[   12.222076] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc03af9bf00
[   12.253856] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
[   12.269441] hub 1-0:1.0: USB hub found
[   12.281019] hub 1-0:1.0: 1 port detected
[   12.292860] scene_lock_init name=ehci_standby
[   12.304904] [ohci0-controller]: sunxi_usb_enable_ohci
[   12.317674] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c568b0
[   12.335315] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
[   12.343979] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[   12.345112] systemd[1]: Expecting device dev-ttyS0.device...
[   12.389990] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 3
[   12.407177] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0xffffffc039983da0
[   12.421187] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   12.421371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   12.421420] systemd[1]: Starting Remote File Systems (Pre).
[   12.490026] systemd[1]: Reached target Remote File Systems (Pre).
[   12.504385] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[   12.520822] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   12.523853] hub 3-0:1.0: USB hub found
[   12.523866] hub 3-0:1.0: 1 port detected
[   12.524009] scene_lock_init name=ohci_standby
[   12.572199] systemd[1]: Starting Paths.
[   12.598268] systemd[1]: Reached target Paths.
[   12.610497] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   12.647467] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   12.665378] systemd[1]: Starting Encrypted Volumes.
[   12.696659] systemd[1]: Reached target Encrypted Volumes.
[   12.710056] systemd[1]: Starting Swap.
[   12.736026] systemd[1]: Reached target Swap.
[   12.748179] systemd[1]: Expecting device dev-mmcblk0p1.device...
[   12.785238] systemd[1]: Starting Root Slice.
[   12.814728] hdmi_clk_enable_prepare()L161
[   12.814743] systemd[1]: Created slice Root Slice.
[   12.814781] systemd[1]: Starting User and Session Slice.
[   12.873785] systemd[1]: Created slice User and Session Slice.
[   12.887231] systemd[1]: Starting Delayed Shutdown Socket.
[   12.922998] systemd[1]: Listening on Delayed Shutdown Socket.
[   12.936181] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   12.972190] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   12.986557] systemd[1]: Starting Journal Socket (/dev/log).
[   13.021382] systemd[1]: Listening on Journal Socket (/dev/log).
[   13.034681] systemd[1]: Starting udev Kernel Socket.
[   13.070582] systemd[1]: Listening on udev Kernel Socket.
[   13.082881] systemd[1]: Starting udev Control Socket.
[   13.109944] systemd[1]: Listening on udev Control Socket.
[   13.122273] systemd[1]: Starting Journal Socket.
[   13.149307] systemd[1]: Listening on Journal Socket.
[   13.161059] systemd[1]: Starting System Slice.
[   13.188663] systemd[1]: Created slice System Slice.
[   13.200169] systemd[1]: Started File System Check on Root Device.
[   13.212874] systemd[1]: Starting system-systemd\x2dfsck.slice.
[   13.247708] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   13.260755] systemd[1]: Starting system-getty.slice.
[   13.287071] systemd[1]: Created slice system-getty.slice.
[   13.298798] systemd[1]: Starting system-serial\x2dgetty.slice.
[   13.326428] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   13.339142] systemd[1]: Starting Increase datagram queue length...
[   13.371842] systemd[1]: Starting Load Kernel Modules...
[   13.406774] systemd[1]: Mounting Huge Pages File System...
[   13.436279] systemd[1]: Starting udev Coldplug all Devices...
[   13.478300] systemd[1]: Started Set Up Additional Binary Formats.
[   13.490902] systemd[1]: Mounting Debug File System...
[   13.514977] systemd[1]: Mounting POSIX Message Queue File System...
[   13.546531] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   13.583852] systemd[1]: Starting Slices.
[   13.611912] systemd[1]: Reached target Slices.
[   13.622405] systemd[1]: Starting Remount Root and Kernel File Systems...
[   13.670976] systemd[1]: Mounted POSIX Message Queue File System.
[   13.700902] systemd[1]: Mounted Debug File System.
[   13.729917] systemd[1]: Mounted Huge Pages File System.
[   13.759432] systemd[1]: Started Increase datagram queue length.
[   13.788969] systemd[1]: Started Load Kernel Modules.
[   13.831896] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   13.843015] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   13.877536] systemd[1]: Started Remount Root and Kernel File Systems.
[   13.907037] systemd[1]: Started udev Coldplug all Devices.
[   13.963157] systemd[1]: Started Various fixups to make systemd work better on Debian.
[   13.976834] systemd[1]: Starting Load/Save Random Seed...
[   14.007472] systemd[1]: Starting Create Static Device Nodes in /dev...
[   14.036585] systemd[1]: Mounting FUSE Control File System...
[   14.066350] systemd[1]: Mounting Configuration File System...
[   14.095522] systemd[1]: Starting Apply Kernel Variables...
[   14.125055] systemd[1]: Starting Syslog Socket.
[   14.153099] systemd[1]: Listening on Syslog Socket.
[   14.163495] systemd[1]: Starting Journal Service...
[   14.212110] systemd[1]: Started Journal Service.
[   14.381082] systemd-udevd[180]: starting version 215
[   14.717142] Driver for 1-wire Dallas network protocol.
[   14.953454] sunxi cedar version 0.1
[   14.962468] [cedar]: install start!!!
[   14.971477] ycy the get irq is 90
[   14.980280] ycy clk_bass_vir 0x18  is ffffff80013f6018, the value:3006207
[   14.992709] ycy clk_bass_vir 0x13c  is ffffff80013f613c, the value:0
[   15.004682] ycy clk_bass_vir 0x64  is ffffff80013f6064, the value:601810
[   15.015885] sunxi-bt bt.28: block state already is 1
[   15.028286] ycy clk_bass_vir 0x2c4  is ffffff80013f62c4, the value:601c10
[   15.041019] ycy clk_bass_vir 0x100  is ffffff80013f6100, the value:0
[   15.052820] [cedar]: install end!!!
[   15.061663] [VFE]cci probe end cci_sel = 0!
[   15.071481] [VFE]cci_init end
[   15.071587] Registered IR keymap rc_map_sunxi
[   15.072077] input: sunxi_ir_recv as /devices/soc.0/1f02000.s_cir/rc/rc0/input5
[   15.072289] rc0: sunxi_ir_recv as /devices/soc.0/1f02000.s_cir/rc/rc0
[   15.088714] IR RC6 protocol handler initialized
[   15.098995] IR NEC protocol handler initialized
[   15.128311] IR JVC protocol handler initialized
[   15.138523] IR Sony protocol handler initialized
[   15.148435] IR SANYO protocol handler initialized
[   15.159175] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input6
[   15.159565] IR MCE Keyboard/mouse protocol handler initialized
[   15.171240] lirc_dev: IR Remote Control driver registered, major 249
[   15.183606] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0
[   15.183609] IR LIRC bridge handler initialized
[   15.206773] IR RC5(x) protocol handler initialized
[   15.511184] [VFE]Welcome to Video Front End driver
[   15.521782] [VFE]csi probe end csi_sel = 0!
[   15.532408] [VFE]csi_init end
[   15.541092] [VFE]isp probe start isp_sel = 0!
[   15.551754] [ISP] isp platform_id = 3!
[   15.561064] [VFE]isp probe end isp_sel = 0!
[   15.570656] [VFE]sunxi_isp_platform_register end
[   15.581144] [VFE]mipi probe start mipi_sel = 0!
[   15.592256] [VFE]mipi probe end mipi_sel = 0!
[   15.602111] [VFE]mipi_init end
[   15.610445] [VFE]flash_init end
[   15.618426] systemd-journald[179]: Received request to flush runtime journal from PID 1
[   15.633371] [VFE]pdev->id = 0
[   15.644162] [VFE]dev->vip_sel = 0
[   15.652576] [VFE_WARN]fetch csi0_dev0_twi_id from device_tree failed
[   15.664492] [VFE_WARN]fetch csi0_dev0_afvdd from device_tree failed
[   15.676283] [VFE_WARN]fetch csi0_dev0_afvdd_vol from device_tree failed
[   15.690313] [VFE_WARN]fetch csi0_dev0_power_en from device_tree failed
[   15.702530] [VFE_WARN]fetch csi0_dev0_flash_en from device_tree failed
[   15.714574] [VFE_WARN]fetch csi0_dev0_flash_mode from device_tree failed
[   15.727363] [VFE_WARN]fetch csi0_dev0_af_pwdn from device_tree failed
[   15.739275] /soc@01c00000/vfe@0: could not find phandle
[   15.749724] [VFE_WARN]Get clk Index:0 , Name:vfe_core_clk is NULL!
[   15.761234] /soc@01c00000/vfe@0: could not find phandle
[   15.771609] [VFE_WARN]Get clk Index:1 , Name:vfe_master_clk is NULL!
[   15.783261] /soc@01c00000/vfe@0: could not find phandle
[   15.793659] [VFE_WARN]Get clk Index:2 , Name:vfe_misc_clk is NULL!
[   15.805149] /soc@01c00000/vfe@0: could not find phandle
[   15.815631] [VFE_WARN]Get clk Index:3 , Name:vfe_core_clk_src is NULL!
[   15.827603] /soc@01c00000/vfe@0: could not find phandle
[   15.838151] [VFE_WARN]Get clk Index:4 , Name:vfe_master_clk_24M_src is NULL!
[   15.850794] /soc@01c00000/vfe@0: could not find phandle
[   15.861457] [VFE_WARN]Get clk Index:5 , Name:vfe_master_clk_pll_src is NULL!
[   15.874228] [VFE_ERR]vfe core clock is null
[   15.883832] [VFE_ERR]vfe clock get failed!
[   15.893304] [VFE]vfe probe err!
[   15.901917] [VFE]vfe_init end
[   16.172079] GPIO 110 valid
[   16.376916] Current_V is : 1
[   16.688895] libphy: 1c30000.eth: probed
[   16.698383] sunxi-gmac 1c30000.eth eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (1c30000.eth-0:00)
[   29.483728] libphy: 1c30000.eth-0:00 - Link is Up - 100/Full

カテゴリー: スモールボード(ラズパイ系)

Orange Pi 2G-IOTが送料込み$13.01で登場

Allwinner H5搭載版のOrange Pi Zero Plus2も登場。H3搭載版と1ドル違い

さしあたってOrange Pi WinでX-Windowを使う方法

Orange Pi Win向けDebian_Server_Jessie_A64_Win_V0_0_1を使ってみた

Orange Pi Winが届いた！・・・でも、まだOSが・・・(3/23 11時:リンクが修正された